Up to 200W Adjustable Output Power/Band
SMJ1890 – Cellular GSM Jammer
The SMJ1890 was designed for blocking GSM cellular network and all kinds of cellular standards in the world. The SMJ1890 uses state-of-the-art technology for maximum performance. The unit is controlled by a microprocessor for PPL & DDS programming.
The unit was designed with the capabilities of jamming specific channels inside the cellular networks bands only. Additionally, jamming of downlink & uplink is possible at the same time. The unit is based on a DDS that can be programmed to transmit up to 36 channels per band, by fast-sweeping between each other. The channel bandwidth is 250 KHz.
The user can control the output power of each band via a programmable attenuator.
Output power can vary from 5W to 100W within 1dB steps. The SMJ1890 transmits a noise signal, which cuts-off all cellular communication between mobile phones and cellular base stations.
The jamming radius depends on the signal strength in a given area. All cellular mobiles in proximity to the SMJ1890 will be totally blocked and will not be able to receive or dial outgoing calls.
OPERATIONAL SCENARIO
- Prisons
- Military Units
- Special Police Units
- Governmental Facilities
- Sensitive Areas
SYSTEM FEATURES
- Jamming up to 60 channels inside the cellular band
- Easy to use programming interface
- Programmable output power for each band
- High VSWR protection
- Built-in filter for minimum RF interference outside the jamming bands
- Installation in IP54/66 enclosure cabinets suited for continuous outdoor operation, with protection against dust and precipitations
- Controlled by PHANTOM-JCMS – Jamming Control Management Software
TECHNICAL SPECIFICATIONS
RF Characteristics
| Max. Output Power per Band | Up to 200W per band |
| Min. Output Power per Band | 5W5Wv |
| Output Power Control Steps | 1dB |
| Internal Modulation | FM Hopping frequency |
| Signal Source | DDS & PLL synthesized |
| Modules Per Unit | Up to 8 Bands |
| Programming Control | TCP/IP Protocol |
Jamming Frequency Range
| Frequency Band | All cellular and Wi Fi frequencies |
| Channel Band Width | 250KHz |
| Channel Spacing | 200KHz |
Physical Data
| Dimensions | IP54/64 Enclosure – |
| Weight | 25-45 Kg |
Environment of operation
| Operating Temp | -10ºC – +65ºC |
| Humidity | 5% – 80% |
Optional Accessories
| Rechargeable Battery | 24VDC / 70AH |
| Control Cable Via PC | TCP/IP Protocol Via LAN Port |
*Specifications are subject to change without prior notice
Ver. 1.00.03.15
Up to 200W Adjustable Output Power/Band
The SMJ1890 was designed for blocking GSM cellular network and all kinds of cellular standards in the world. The SMJ1890 uses state-of-the-art technology for maximum performance. The unit is controlled by a microprocessor for PPL & DDS programming.
The unit was designed with the capabilities of jamming specific channels inside the cellular networks bands only. Additionally, jamming of downlink & uplink is possible at the same time. The unit is based on a DDS that can be programmed to transmit up to 36 channels per band, by fast-sweeping between each other. The channel bandwidth is 250 KHz.
The user can control the output power of each band via a programmable attenuator.
Output power can vary from 5W to 100W within 1dB steps. The SMJ1890 transmits a noise signal, which cuts-off all cellular communication between mobile phones and cellular base stations.
The jamming radius depends on the signal strength in a given area. All cellular mobiles in proximity to the SMJ1890 will be totally blocked and will not be able to receive or dial outgoing calls.