PHJD24 – Counter Surveillance Equipment
The counter surveillance equipment PHJD24 has been designed for detection of nonlinear junctions.
Nonlinear junctions include a wide variety of components such as diodes, transistors, IC’s, etc. The PHJD24 can detect electronic circuits such as hidden transmitters, and tape recorders even though DC source is NOT applied.
Corrosive junctions, hence discards false alarms. Both 2nd & 3rd harmonics The PHJD24 is a state-of-art the Non Linear Junction Detector based on the latest technology and includes DDS and DSP components. The system provides an evaluation of the 2nd and 3rd harmonic.
When the system receives a strong 2nd harmonic, it indicates the presence of electronic components while a strong 3rd harmonic reception indicates false is displayed at the same time.
1. Transmitter:
a. Frequency: 840 – 915 MHz
b. Output power equal and no more than 4W (continuous)
c. FM modulation continuous (AM if customer requires)
2. Receiver:
a. 1,680 – 1,830 MHz and 2,520 – 2,745 MHz respectively
b. Sensitivity -133dBm
3. Antennas:
a. Control function with volume and power selection
b. All cables and connectors are secured
4. Output:
a. Audio: with and without headphone
b. Display: visual display distinguishing 2nd and 3rd harmonics
c. False alarm rate: lower than 3%
5. Power:
a. Battery: rechargeable with minimum 3 hours operation on single operation full charge. The battery has protection against reversed polarity.
b. Battery charger: 180 – 240V
6. Detects and identifies semiconductor and corrosive bimetal junctions
TECHNICAL ADVANTAGES
- Fully digital system
- Automatic or manual channel select
- High power transmitter (+38 dBm)
- Excellent receiver sensitivity
- CW or Pulse mode operation
PHJD24 ADVANCEMENT
- LED Display with high brightness
- High gain circular antenna
- Minimum setup time
- Robust & lightweight design
- Easy to use
- Rechargeable batteries Li-Polymer
TECHNICAL SPECIFICATIONS
Transmitter
| Output Power- | Adjustable 18 – 38 dBm (Max. 8W) |
| Frequency Range | 840-915 MHz |
| Signal Source | DDS |
| Antenna | 50 Ohm Directional Antenna |
| Antenna Gain | 4 dBi |
Receivers
| Sensitivity | -133 dBm |
| Frequency Ranges |
1,680 – 1,830 MHz 2,520 – 2,745 MHz |
Controls
| Channel Select | 1 to 825 |
| Output Power | 18 – 38 dBm with 1 dB steps |
| ON/OFF | Touch panel |
Mode of Operation
| Channel Select | Manual or Automatic Channel Select |
| Output Power | Manual or Automatic Output Power |
| Display | Double row LED display |
Mode of Operation
| Operating Temp. | -5ºC – +60ºC |
| Humidity | 5% – 90% |
Physical
| Sensing head | 21 cm in diameter |
| Weight | 2.5 Kg |
*Specifications are subject to change without prior notice
*Ver. 1.00.04.17
The counter surveillance equipment PHJD24 has been designed for detection of nonlinear junctions.
Nonlinear junctions include a wide variety of components such as diodes, transistors, IC’s, etc. The PHJD24 can detect electronic circuits such as hidden transmitters, and tape recorders even though DC source is NOT applied.
Corrosive junctions, hence discards false alarms. Both 2nd & 3rd harmonics The PHJD24 is a state-of-art the Non Linear Junction Detector based on the latest technology and includes DDS and DSP components. The system provides an evaluation of the 2nd and 3rd harmonic.
When the system receives a strong 2nd harmonic, it indicates the presence of electronic components while a strong 3rd harmonic reception indicates false is displayed at the same time.